Local mold removal
Mold Removal in St. Paul, TX
Call when you need help assessing and removing mold in St. Paul.
Call (844) 352-3560
Talk to a mold removal specialistAnswered 24 hours a day. No forms.
- Moisture source checked first
- Containment and HEPA filtration
- Homes, rentals and businesses
Moisture control mattersFix the water problem or mold can return.
24/7 callsDay, night, weekends and holidays
Moisture source firstFind and fix the leak or humidity
Contained work areaPlastic sheeting and HEPA filtration
St. PaulHomes, rentals and businesses
Local conditions
Mold Removal Conditions Around St. Paul
Housing numbers tell you about the locality, rather than the state of your property. Let the assessment findings guide your arrangements for moisture repairs, access and records.
879residentsACS 2024
4%of occupied housing units are rentedACS 2024
2000median year housing units were builtACS 2024
14residents 65+ live aloneACS 2024
Census ACS 2024 5-year (tables B01003, B25003, B25035, B09021 and B25024). Area estimates do not establish conditions at an individual property.
In St. Paul, renters occupy 4 percent of occupied housing units. Use your own inspection findings to plan repairs and keep copies of the agreed cleanup steps.
The median year built for housing units in St. Paul is 2000. This does not establish your building age or condition. For your property, record the rooms affected and ask who can authorize access before work begins.
Single-family units make up 94 percent of all housing units in St. Paul. Before work starts, discuss access to the affected room and any adjoining space that needs inspection.
In St. Paul, 12 percent of residents aged 65 or older live alone. Confirm who can approve opening affected materials and how you will receive the findings and next steps.
Local Mold Facts for St. Paul
- License: Texas licenses mold assessment consultants, mold assessment technicians and mold remediation contractors through the Texas Department of Licensing and Regulation (TDLR). Visible mold under 25 contiguous square feet can generally be cleaned by people without a license, and you can check any contractor in the TDLR license search.
- Disclosure: Ask which mold and moisture findings must be disclosed before a sale or lease in your area.
- Renters: Renters should report leaks and visible mold to the property owner in writing and keep a copy.
- Agency: Texas mold questions go to the Texas Department of Licensing and Regulation, which took over the state mold program from the Department of State Health Services on November 1, 2017. TDLR also publishes a Consumer Mold Information Sheet that state license holders give clients before work begins.
State guidance: TDLR Mold Assessors and Remediators FAQs; TDLR Mold Program Update (SB 1255), Sept 17, 2025; Texas DSHS page noting mold program transfer to TDLR
Call (844) 352-3560No forms. Just call.
Mold removal explained
What Mold Removal Includes
Mold removal includes locating your moisture source and containing the affected area, discarding material beyond cleaning, and drying material that can remain.
Mold mitigation and mold cleanup refer to work related to mold abatement and mold remediation. Include the water intrusion or humidity cause, visible mold growth and damp materials in your scope.
Mold removal in St. Paul starts by finding and fixing the moisture source. The affected area is contained, damaged porous material may be removed, and remaining surfaces are cleaned and dried. Larger areas, HVAC systems, and growth linked to contaminated water call for professional help.
If your concern crosses a shared wall, ask who can authorize access on both sides and document which rooms need assessment.
- Growth you notice or a musty odor
- Hidden moisture behind walls or floors
- Mold near HVAC equipment
- Damage caused by flooding or leaks
Call (844) 352-3560Talk it through with a cleanup specialist
Health and safety
Understanding Moisture and Affected Materials
Your affected materials can spread mold spores and dust to clean rooms when disturbed, which is why containment matters.
Hidden Materials Can Stay Damp
Your insulation, subfloor or framing could still be wet despite a surface appearing dry. Use moisture readings to identify the affected area.
Mold Spores Can Spread
Cutting drywall or pulling carpet can release particles. Movement can be limited using HEPA filtration alongside negative air pressure.
Color Does Not Measure Risk
Black mold and toxic mold are search terms. According to the CDC, mold color cannot tell you the level of risk.
Some People Face More Risk
Mold can trigger allergy and asthma symptoms in some people. People with weak immune systems, asthma or lung disease are more at risk, according to the CDC.
Call (844) 352-3560Answered 24/7, including holidays
What you get
Compare Mold Remediation Companies Serving Dallas County
Start With the Moisture Source
Request an explanation of how the leak or condensation or humidity issue will be identified and resolved.
Use Independent Clearance Testing
An independent assessor can perform any needed post-remediation verification so the company doing removal does not also check that work.
Ask for a Clear Scope of Work
Your scope should spell out repairs, cleanup and drying, identify affected materials and containment, and list what could alter the price.
Call (844) 352-3560Ask about cost and timing by phone
Every service
All 44 Mold Cleanup Services in St. Paul
Choose the mold service that matches what you see. You can also call if you are unsure which page fits.
Mold Removal by Area of the Home
- Wall and Drywall Mold Removal
- Basement Mold Removal
- Floor and Subfloor Mold Removal
- Crawl Space Mold Removal
- Wood Framing Mold Removal (Joists, Studs, Rafters)
- Crawl Space Encapsulation
- Bathroom Mold Removal
- Closet Mold Removal
- Insulation Mold Removal
- Attic Mold Removal
- Kitchen Mold Removal
- HVAC and Air Duct Mold Removal
- Ceiling Mold Removal
- Garage Mold Removal
Mold Removal Methods
Mold Inspection and Testing
Mold Removal Cost Guide
Call (844) 352-3560Private help, day or night
First steps
Steps Before You Call Mold Removal Professionals in Dallas County
Stop the water if it is safe, avoid disturbing growth and preserve useful records.
Call (844) 352-3560- Stop the water safely. Shut off a leaking fixture or arrange a repair. Do not approach standing water or any wet electrical equipment.
- Limit access. If possible, leave the door closed. Keep children and pets away from visible growth.
- Avoid spreading particles. Do not brush, sand or scrape mold without containment. Turn off HVAC equipment that may contain mold.
- Photograph the damage. Make a record of visible growth, damaged belongings and the leak before anything is moved. Ask the insurer which records it needs.
Step by step
The Mold Remediation Sequence
These mold remediation steps follow this order: assess the area, contain it, remove damaged material, clean, dry and verify the work, then take containment down.
Mold Inspection and Moisture Mapping
A moisture meter and, when useful, a thermal imaging camera help trace the moisture source and affected materials.
Containment and Air Filtration
A containment barrier is made using poly sheeting. To limit particles entering clean rooms, negative air pressure works alongside an air filtration device called a HEPA air scrubber.
Removal of Damaged Materials
Protective equipment is used by workers. Damaged porous materials may require demolition, including drywall removal.
Surface Cleaning and Drying
Clean remaining non-porous surfaces through damp wiping and use of a HEPA vacuum. Moisture readings guide drying alongside air movers and a dehumidifier.
Final Cleaning and Verification
Post-remediation verification can involve clearance testing, a visual examination or air sampling, carried out by an independent assessor.
Price ranges
Understanding Mold Removal Cost in St. Paul, TX
Fixr lists a typical national mold remediation range of $1,500 to $9,000. For professional work covering more than about 10 square feet, the listed rate is $10 to $30 per square foot. What you pay reflects materials, repairs, the affected area, drying and containment.
Typical National Mold Remediation Range
$1,500 to $9,000Source: Fixr, Mold Remediation Cost (checked 2026-10-23)Rate for Professional Work Above About 10 Square Feet
Each Square Foot Costs $10 to $30Source: Fixr, Mold Remediation Cost (checked 2026-10-23)Two Samples and Laboratory Testing With a Typical Inspection
$450 to $800Source: Fixr, Mold Inspection Cost (checked 2026-10-23)Insurance and who pays
Will Insurance Cover Mold Removal in Texas, or Will You Pay?
For insurance coverage, both the cause of moisture and policy matter. A covered sudden water event could qualify; ongoing leaks, neglect and humidity often face exclusions or limits.
Homeowners Insurance and Mold Removal
Ask whether the water event is covered, whether a mold sublimit applies and what an insurance claim needs before materials are removed.
Renters and Landlords in Dallas County
Renters should report leaks and visible mold to the property owner in writing and keep a copy.
Property Disclosures
Ask which mold and moisture findings must be disclosed before a sale or lease in your area.
Looking for a Mold Removal Service in St. Paul?
Call at any time. A mold cleanup specialist can outline what comes next for your property.
Questions
Mold Cleanup: Questions and Answers
When should you seek professional mold removal?
EPA guidance points to professional help for areas larger than about 10 square feet, extensive water damage, an affected HVAC system, or sewage or contaminated water.
What should you check to find mold in your house?
Search for a musty odor, visible growth and evidence of moisture by HVAC equipment, windows, plumbing and roofs. Damp material can be located during a mold inspection. Mold testing is not always needed when growth and its water source are clear.
How much time should you allow for mold remediation?
The affected area, drying, material removal and fixing the moisture source determine how long it takes. Ask for the sequence before work starts.
Is a different process needed for black mold?
You cannot judge mold risk from color alone. Base the removal plan on the affected area, material, moisture source and containment needs.
Is mold able to return following removal?
Mold may come back when humidity, a leak or condensation goes uncorrected. The remediation plan should identify the moisture source and explain drying and moisture control.
Call a Mold Remediation Company for Your Greater Dallas Property
Someone answers calls around the clock, including during holidays and on weekends, 24 hours a day.